Power Cable, Powerpole to Powerpole with fuse holders, 12 GA. and your choice of fuses in both sides. This Powerpole cable is designed to be inserted between a radio or other device and the power source to protect both the hot and ground side. It has 2 inline fuse holders to protect both legs of the circuit and the battery in case of a short. They are fabricated from fuse holders with 12 GA wire. You can change the fuse to your required load amperage. They are terminated with a Powerpole® connector at both ends. Fuses for these cables can be ordered from the Fuse section, FS-ATO, and are available from 1 to 40 Amps.