Loading... Please wait...

Programming Cable for TERA Dual Band Radios

  • Image 1

Product Description

Easily program your TERA dual band radio from your PC (Windows 8.1, 8, 7 or Vista) over USB. Programming software is available as a free download from our website. Works with TERA models TR-590, TR-500 & TR-505 handheld radios.

Write your own product review

Product Reviews

  1. Easy to use! 5 Star Review

    Posted by on 6th Aug 2017

    I have Windows 7 and a TR-505 radio.
    Plugged this programming cord into a USB port on the front of my PC tower.
    Windows 7 went to work finding and installing the driver for the cord.
    Took about 5 mins to find and install the driver for the cord.
    After it was done with the driver I plugged the cord into my TR-505.
    Turned the power/volume knob for the TR-505 to 'on'.
    Green LED on front of radio flashed a few times (maybe 3?) then stopped.
    Hit the 'write' button on the free downloaded programming software (which is pretty simple to use and figure out).
    Green LED on radio flashed rapidly multiple times indicating it was receiving and writing the file (took 5-10sec).
    Stopped flashing when it was done doing it's thing.
    Turned the power to the radio 'off'.
    Unplugged the cord.
    Replaced the rubber cover over the input ports on the radio to protect against debris and moisture.
    It's that easy!

    Just remember to name and 'Save As' your custom file you use to download to your radio so you can pull it up again next time you wish to program another radio unit, or if you want to reference it to check settings. I found that the software, after closing and reopening, reverts back to a default list of frequencies each time that is different than the one used in it's previous session. At least that was my experience.

Add to Wish List

Click the button below to add the Programming Cable for TERA Dual Band Radios to your wish list.

You Recently Viewed...

PayPal Acceptance Mark