DC12-GO-BOX, U1 Case, Powerpole, DVM, USB Charger Port, 30 AH LiFePO4 Battery. This configuration can be ordered with one of 3 sizes of Lithium Iron Phosphate (LiFePO4) batteries. 15 Ah, 20 Ah or 30 Ah, depending on your requirements. The case has a dual Powerpole connector for power distribution or charging input such as a solar charge controller or automotive power input. The input and output can be used simultaneously. There is a Digital Volt Meter (DVM) to monitor the battery condition. Also included is a USB charging port to keep your phone or other USB devices charged. This unit also comes with the a 4 Amp charger for Lithium type batteries.
Do not use automotive type chargers or maintainers for this type battery. They will not charge the batteries properly.
Bioenno Power offers a 14.6VDC, 4A AC-to-DC Charger for LiFePO4 batteries, Model BPC-1504DC, which uses a DC plug for charging LiFePO4 batteries. Please ensure that the LiFePO4 batteries include a PCM/BMS when using this particular charger.
About the Battery (30 Ah shown, but the batteries offered have the same ratings)
The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-1230A is a state of the art 12V 30Ah battery. The BLF-1230A is the entry level unit of Bioenno Power's high-power 12V battery line designed for more stationary applications and higher power consumption portable electronics requiring a higher capacity and greater power output battery while demanding a battery which can reliably provide excellent performance over an extended service life. The battery has an integrated PCM (protection circuit module) which provides complete internal cell balancing, complete integrated protection along with integrated charge circuitry and boasts no EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) and is absolutely quiet!
About the Charger
This unit has available a 110VAC/220 VAC AC-to-DC charger, that provides 4A, with a DC Plug. Please note that this battery should be charged using a LiFePO4 compatible charger, and not with a charger for SLA batteries.
Model BLF-1230A Battery Specifications
Charge Connector: DC Plug
Discharge Connector: Anderson Powerpole SB-50, gray.
Maximum Continuous Discharge Current: 40A (make sure your electrical load consumes less than 40A)
Maximum Power Delivered to Load @ 12V: 480 Watts (12V x 40A = 480 Watts)
Dimensions: 6.5 in. x 6.5 in. x 3.3 in. (164 mm x 164 mm x 85 mm) (updated dim.)
Weight: 7.4 lbs. (3.4 kg.)
Includes built-in PCM (protection circuit module) which provides internal cell balancing and management, protection from overcurrent, undervoltage (overdischarge), overvoltage and short circuiting, and has integrated charging circuitry.
Input: 110 VAC
Output: 14.6VDC, 4A (CC/CV Charge Profile for LiFePO4 Batteries)
Dimensions: 5.25 in. x 2.25 in. x 1.125 in.
Weight: 1 lb. (0.45 kg.)
Connector: DC Plug