All the materials you need to make your own DC-12-MINI Power Source. Available with a 12 Volt, 15 Amp Hour battery, 4 Amp 3 stage battery charger; Cigarette lighter type power outlet; DVM (Digital Volt Meter); dual Powerpole outlets; dual 3 Amp USP charging port; switches; harness; ammo can and LiFePO4 or AGM battery. These units are built in the available rugged ammo can that is considered weather resistant.
They are light weight at 11 pounds with AGM battery or 6 pounds with LiFePO4 (Lithium) battery and easy to carry. Makes an ideal portable power source for 5 to 100 watt radios depending on your battery selection. A good source for recharging hand held radios in the field and your phone with the USB port.
Dimension: 12" Wide, 5" Deep, 7" Tall
Weight: 11 Lbs with AGM battery, 5.6 Lbs with 15 Ah Lithium battery and 7.4 Lbs with 20 Ah Lithium battery.
ORDERING NOTE: If you order the Wiring Harness, you will not need the Powerpole Snap-In Chassis Mount Connector. It is included with the harness.
If you are doing your own harness, the Snap-in Powerpole connector uses 30 Amp or 45 Amp connectors. This refers to the wire size. 30 Amp will hold up to 12 GA and 45 Amp will hold up to 10 GA or double up 2 - 14 Ga wires as we do with the harness.