DC12 MAX SOLAR GO-BOX: Powerpole,DC Input or Output; DVM/USB-QC3.0 and Type C Power Delivery; Cigarette type Automotive Power Port; Solar panel direct input to built-in 300 watt MPPT charge controller; Illuminated power switch for 1 Powerpole and DVM/USB meter and charger. This configuration can be ordered alone or with one of 8 sizes of Lithium Iron Phosphate (LiFePO4) batteries, 9, 12, 15, 20, 30, 40, 50 or 60 Amp hours. There are dual Powerpole connector for power distribution or charging the battery from another source. The automotive power port can be used the same way. The input and output can be used simultaneously. There is a Digital Volt Meter (DVM)/USB QC3.0 and Type C Power Delivery port to monitor the battery condition and outlet for fast charging or multiple charging protocols. keep your phone or other USB devices charged. Also an automotive Cigarette Lighter type power port for devices that use that type of connection such as CPAP or 110 VAC Inverter. The case is considered water resistant. With batteries of 30 Ah or less, there is room for other items inside, like a 300 Watt pure sine-wave inverter and cables.
The solar input (yellow Powerpole connector) connects directly to a built-in 300 watt MPPT charge controller. All you need is a solar panel and a cable and you are ready to go.
Do not use automotive type chargers or maintainers for a LiFePO4 type battery. They will not charge the batteries properly.
The Bioenno Power charger installed is a 14.6VDC, matched to the LiFePO4 battery installed. The Bioenno batteries come with a PCM (Protection Circuit Module) ready for this particular type charger.
Case Dimensions: Inside Outside
12" x 9" x 5.25" 13.63" x 11.63" x 6.0"
About the Battery
The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-Series is a state of the art 12V battery. The BLF-Series is designed for more stationary or portable applications and higher power consumption portable electronics requiring a higher capacity and greater power output battery while demanding a battery which can reliably provide excellent performance over an extended service life. The battery has an integrated PCM (protection circuit module) which provides complete internal cell balancing, over and under voltage and current protection. Complete integrated protection along with integrated charge circuitry and boasts no EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) and is absolutely quiet!
BLF-Series Batteries Available for the MAX-GO-BOX
Battery Description Charger supplied Total Weight
BLF-1209A 12 volts, 12 Ah, 4.3" x 3.2" x 3.1", 2.7 lbs. BPC-1502DC - 2 AMP 7.9 lbs
BLF-1212AB 12 volts, 12 Ah, 4.4" x 4.3" x 3.0", 3.6 lbs. BPC-1502DC - 2 AMP 8.8 lbs
BLF-1215A 12 volts, 15 Ah, 5.5" x 4.3" x 3.2", 4.3 lbs. BPC-1504DC - 4 AMP 9.7 lbs
BLF-1220A 12 volts, 20 Ah, 6.5" x 4.3" x 3.3", 5.3 lbs. BPC-1504DC - 4 AMP 10.6 lbs
BLF-1230A 12 volts, 30 Ah, 6.5" x 6.4" x 3.4", 8.0 lbs. BPC-1506DC - 6 AMP 13.5 lbs
BLF-1240A 12 volts, 40 Ah, 8.4" x 6.3" x 3.2", 10.4 lbs. BPC-1506DC - 6 AMP 16.0 lbs
BLF-1250A 12 volts, 50 Ah, 8.4" x 5.8" x 4.3", 13.3 lbs. BPC-1510A - 6 AMP 18.8 lbs
BLF-1260A 12 volts, 60 Ah, 8.9" x 8.1" x 5.4", 17.4 lbs. BPC-1510A - 10 AMP 24.1 lbs (external only. Will not fit inside the box.)